Your Questions Answered By Our Experts
When I turn the key in my car, all I hear is a continuous clicking noise, and it won't start.
When a car makes a continuous clicking noise but won't start, it's often because the battery is dead or has a low charge. This can be caused by leaving the lights on overnight or not driving the car frequently enough to keep the battery charged. It may also indicate that the battery is old and in need of replacement. In some cases, the issue may not be with the battery at all but rather with the starter, which is responsible for turning over the engine. In any case, it's important to have a professional mechanic assess and diagnose the problem in order to ensure the safe and reliable operation of your vehicle.
What Others are Asking
What is the meaning of OBD-II code P0455, and what are the possible causes and solutions for this code to be
OBD-II code P0455 refers to a large leak in the Evaporative Emission Control System (EVAP). The EVAP system is responsible for preventing fuel vapor from escaping into the atmosphere, and it is compos...
What could be the issue if the check engine light is on and the cooling system warning keeps flashing along with the light bolt and automatic start/stop function in the ECS system?
If your check engine light is on and the cooling system warning keeps flashing, along with the lightening bolt and automatic start/stop function in the ECS system, here are a few potential causes and ...
The steering wheel is locked, and the key won't turn. Once, I was able to unlock it and turn on the ignition, but then it locked up again. I need to know what part is failing so that I can fix it.
First, check the battery to make sure that it has enough power to operate the locking mechanism. If the battery is low, charging it may solve the problem. If the battery is fine, then the issue is lik...
What is the meaning of OBD-II code P0327, and what are the possible causes and solutions for this code?
OBD-II code P0327 stands for "Knock Sensor Circuit Low Input." It indicates a problem with the knock sensor or its circuit that provides feedback to the engine control module (ECM) about engine detona...
What is the size and weight for a 42RLE transmission?
The 42RLE transmission weights approximately 125-150 lbs and has a size of 24.5" x 21.5" x 13.5". This transmission can have an additional 1" to 2" added to the length for an oil cooler. When looking...