Your Questions Answered By Our Experts
What does the Service StabiliTrak message indicate?
The Service StabiliTrak message indicates that there may be a problem with the vehicle's stability control system. This system is designed to help keep the vehicle stable and on course in slippery or uneven driving conditions. If there is a problem with the system, it may not be able to detect and correct changes in the road surface properly. As a result, the vehicle may become less stable and more likely to veer off course. If you see the Service StabiliTrak message, it is important to have the vehicle checked by a qualified technician as soon as possible.
What Others are Asking
What is the meaning of OBD-II code P0123, and what are the possible causes and solutions for this code to be generated?
The code P0123 signifies that the Engine Control Module (ECM) has detected that the voltage output of the TPS circuit A has exceeded the predetermined voltage range for the sensor. This code is a stan...
What is the meaning of OBD-II p0328 code , and what are the possible causes and how to solve this issue?
The OBD-II code P0328 stands for Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor) and indicates that the knock sensor circuit has a high voltage output. This fault can be caused by sever...
After stopping at a red light, I put my foot on the gas pedal; however, the car only moved jerkingly after a few seconds. What can be the cause?
The most likely cause is that your car needs a tune-up. When a car's engine runs, the spark plugs create tiny explosions that power the engine. Over time, these plugs can become fouled by deposits of ...
What will happen if my oil pressure switch is bad?
As your car's engine runs, it uses oil to lubricate and cool components. The oil pressure switch is a sensor that monitors the pressure of the engine oil. If the pressure gets too low, the switch send...
What is the meaning of OBD-II code P0171, and what are the possible causes and solutions for this code to be generated?
OBD-II code P0171 refers to a lean condition in the engine's fuel system. A lean condition occurs when there is not enough fuel in the air-fuel mixture and too much air. The Engine Control Module (ECM...