Your Questions Answered By Our Experts
Why there's a metallic or almost bell sound "ringing" when accelerating?
A loose heat shield usually causes this sound in the exhaust system. When the vehicle accelerates, the heat shield vibrates and produces this sound. Gently shaking it, you can check to see if the heat shield is secure. You will need to have it replaced or repaired if it is loose. The metallic sound when accelerating can also be caused by a loose catalytic converter. The converter is bolted to the exhaust system and can become loose over time. You will need to have it checked and repaired or replaced if it is rattling. Another potential cause of a metallic sound when accelerating is a problem with the muffler. The muffler can develop holes or cracks that allow exhaust gases to escape. This can create a loud, metallic sound. If you suspect your muffler is the problem, have it inspected by a professional to see if it needs to be repaired or replaced.
What Others are Asking
What is the meaning of OBD-II code P0155, and what are the possible causes and solutions for this code to be generated?
The P0155 code indicates slow heating of the oxygen sensor's heater element. The PCM stores the code, and the Check Engine Light turns on to alert the driver of the issue. There are several possible ...
What is causing a car's belt to break due to oil leakage?
If your car's belt is breaking due to oil leakage, there are several potential reasons: Tension Issues - Improper tension on the belt can cause it to slip, leading to premature wear and breakage. Oil ...
What does red lightning bolt on the dash mean?
Some common issues that can cause the light to come on are: A problem with the throttle position sensor A problem with the accelerator pedal position sensor A problem with the electronic throttle cont...
What does the “Power steering assist fault” warning on my car Ford Fusion mean?
This warning indicates that there is a problem with the power steering system. It could be something as simple as low fluid levels or a more serious issue such as a power steering pump failure. Eith...
What is the meaning of OBD-II code P0131, and what are the possible causes and solutions for this code to be generated?
P0131 indicates a problem with the left side (bank 1) oxygen sensor 1 (before the catalytic converter) and could mean an issue with the air-fuel ratio or improper voltage from the sensor. There are s...