What is the process for replacing the rear drum brakes on a Chevy Silverado?

Here is a more detailed guide on how to replace the rear drum brakes on a Chevy Silverado: Elevate the rear of the vehicle and remove the wheels. Use a floor jack to lift the rear of the vehicle and support it with jack stands. Remove the wheels by loosening the lug nuts and pulling the wheels off. Remove the brake drum and inspect the brake components. Remove the brake drum by tapping it gently with a hammer until it comes loose. Check the brake shoes and hardware for wear and damage. If the shoes or hardware are worn or damaged, they will need to be replaced. Remove the brake shoes and hardware. Disconnect the brake shoe hold-down springs by using pliers to remove the clips. Remove the brake shoes and the other hardware, including the adjuster and adjuster lever. Clean and lubricate the brake components and install the new shoes and hardware. Clean the brake components thoroughly, and lubricate the moving parts with high-temperature brake grease. Install the new brake shoes and hardware, including the adjuster and adjuster lever. Connect the brake shoe hold-down springs by using pliers to install the clips. Reinstall the brake drum and wheels, and test the brakes. Slide the brake drum back onto the wheel studs and adjust the brakes until the drum fits snugly. Reinstall the wheels by tightening the lug nuts and lowering the vehicle. Test the brakes by pumping the brake pedal a few times before driving.