Your Questions Answered By Our Experts
I have a situation like this; the engine cranks, the ignition is slow, and the car does not start. What's the problem?
One possibility is that the battery may be weak or dead. If this is the case, you'll need to jumpstart the car or replace the battery. Another potential problem is that the starter may malfunction. This is often indicated by a clicking sound when you turn the key in the ignition. If the starter is the issue, it will need to be replaced by a professional mechanic. Lastly, if the fuel pump is not working properly, it can prevent fuel from reaching the engine, causing it to stall. Again, this is a repair that will need to be made by a qualified technician. While it can be frustrating to deal with a car that won't start, troubleshooting the problem can narrow down the potential causes and help you get back on the road.
What Others are Asking
What does "service stability system" warning light mean?
The "service stability system" warning light is an indication that there may be a problem with the vehicle's stability control system. This system is responsible for helping to keep the vehicle stable...
What is the meaning of OBD-II code P0303, and what are the possible causes and solutions for this code to be generated?
The ECU sets the P0303 code when multiple misfires are detected from cylinder 3, causing the Check Engine Light to come on and the vehicle to enter failsafe mode. The light remains on until the issue ...
What is the maxium amount of weight a 2008 Mini Cooper can carry?
The maximum amount of weight a 2008 Mini Cooper can carry is 1,100 pounds. This weight includes the weight of the passengers, as well as any cargo that may be in the car. It is important to note that ...
What causes the P0455 code to appear in a GMC Yukon?
The P0455 code is a diagnostic trouble code that indicates a large evaporative emission (EVAP) system leak. This code may appear in a GMC Yukon due to the following reasons: a. Loose or damaged gas c...
Why Stabilitrak & Control Lights are On?
The Stabilitrak and control lights are turned on when there is a problem with the vehicle's stability control system. This could be due to a variety of reasons, such as a faulty sensor or a problem wi...