Your Questions Answered By Our Experts
Is it normal for the crankshaft pulley to be stuck if the car is off.
The crankshaft pulley is responsible for turning the engine over when the car is started. If the pulley is stuck, it can prevent the engine from starting. Sometimes, the pulley may become stuck if the car has been sitting for a long period without being started. If you try to start the car and the crankshaft pulley is stuck, you may need to have it replaced. To avoid getting the crankshaft pulley stuck, it is important to start the car regularly and use a lubricant on the pulley. If the pulley does become stuck, do not try to force it to turn. This can damage the engine. Instead, take the car to a mechanic so they can diagnose the problem and make the necessary repairs.
What Others are Asking
What is the meaning of OBD-II p0356 code , and what are the possible causes and how to solve this issue?
The OBD-II code P0356 stands for Ignition Coil F Primary/Secondary Circuit Malfunction and indicates that there is an issue in the primary or secondary circuit of ignition coil F. This fault can be...
Why does my car vibrate between 50-60 mph?
This common occurrence can often be attributed to two key factors: uneven tire wear and wheel misalignment. When tires become worn, the treads may not make uniform contact with the road, causing vibra...
The steering wheel is locked, and the key won't turn. Once, I was able to unlock it and turn on the ignition, but then it locked up again. I need to know what part is failing so that I can fix it.
First, check the battery to make sure that it has enough power to operate the locking mechanism. If the battery is low, charging it may solve the problem. If the battery is fine, then the issue is lik...
Why does it mean when slip light is on?
The slip light relates to the traction control system (TCS). The TCS is a system that helps prevent wheels from spinning, especially when starting on slippery surfaces. It does this by reducing engine...
After replacing the camshaft position sensor, my car idles and stops. What can be the cause?
The problem could be a number of things, but it is most likely that the new sensor is not compatible with your car. Make sure to check the compatibility of the new sensor before you buy it. Another po...