Decoding the P0335 Code in Your Nissan: Causes and Solutions
Your Nissan is designed to provide a smooth and reliable driving experience, but sometimes unexpected issues can arise.
One of the most common problems Nissan owners face is the P0335 trouble code, which indicates a malfunction with the crankshaft position sensor. If left unaddressed, this code can lead to more severe engine problems and potentially leave you stranded on the side of the road.
This article will take a look at the causes and solutions for the P0335 code in your Nissan, so you can identify and fix the problem quickly and effectively.
Fixing the P0335 Code with Goodhood
If the car's check engine light comes on and you encounter the P0335 code while driving and are left stranded on the side of the road, it can be a frustrating experience.
However, mobile auto repair services like Goodhood can provide a quick and convenient solution to fix the problem.
With our team of experienced and ASE-certified mechanics, we can come to your location and diagnose the issue on the spot!
We use advanced tools and equipment to diagnose the problem quickly and provide affordable and transparent pricing for our services.
Wherever you are, Goodhood mobile auto repair services can help get your car back on the road safely and quickly!
Common Causes of the P0335 Code
Crankshaft Position Sensor Circuit Malfunction
The crank sensor is the one responsible for monitoring the position and the speed of the crankshaft. It sends the data to the engine control module (ECM). A malfunctioning sensor can cause the P0335 code to trigger. The crankshaft position sensor circuit may be disrupted by electrical problems, wear and tear, or physical damage.
Damaged Camshaft Position Sensor Wiring
The camshaft position sensor wiring may be damaged, resulting in an electrical malfunction that causes the P0335 trouble code to appear.
Damaged or Loose Crankshaft Position Sensor Connector
The crankshaft position sensor has a connector that can become loose or damaged over time, which can lead to an electrical malfunction.
Oil Contamination
Oil contamination can cause the crankshaft sensor to fail and trigger the P0335 code. Over time, some dirt and debris can accumulate in the oil and damage the crankshaft position sensor.
Wiring Issues
If the wiring harness that connects the crankshaft position sensor to the ECM is damaged, frayed, or broken, it can cause a communication issue between the two components, resulting in the P0335 code.
Failed ECM
In some cases, a failed ECM can trigger the P0335 code. This may occur due to internal damage or a power surge.
Timing Belt or Chain Problems
The timing belt or chain plays a crucial role in the operation of the engine. If it is damaged or not functioning, it can cause the crankshaft position sensor to detect incorrect data, leading to the P0335 code.
Mechanical Issues
A damaged or worn crankshaft, damaged harmonic balancer, or other mechanical problems can cause the crankshaft position sensor to detect incorrect data, leading to the P0335 code.
It's essential to have a professional mechanic properly diagnose the issue to ensure that the correct repair is made. Ignoring the P0335 code can lead to more severe engine problems down the line.
How a Professional Mechanic Inspects and Diagnoses the P0335 Code
When a professional mechanic inspects and diagnoses the P0335 code, they typically follow a series of steps to determine the underlying cause. Here is an overview of what they may do:
Conduct a Visual Inspection
The certified mechanic will start by visually inspecting the crankshaft position sensor and its wiring harness. They will check for any damage, corrosion, or wear/ tear that could be causing the issue.
Perform a Scan Tool Diagnosis
Next, the mechanic will use a specific scan tool to communicate with the engine control module
(ECM) and retrieve any fault codes. This will allow them to pinpoint the cause of the P0335 code and identify any other codes that may be present.
Test the Crankshaft Position Sensor
The mechanic will test the crankshaft position sensor using a multimeter to check for proper voltage, ground, and signal. If the sensor is faulty, they will replace it.
Check the Wiring Harness
If the crankshaft position sensor is functioning properly, the mechanic will inspect the wiring harness for any signs of damage, such as fraying, wear, or looseness. If there are any issues, they will repair or replace the wiring harness.
Inspect the ECM
If the crankshaft position sensor and wiring harness are both in good condition, the mechanic will inspect the ECM for any signs of damage or malfunction. If it is faulty, they will replace it.
Check the Timing Belt or Chain
If no issues are found with the crankshaft position sensor, wiring harness, or ECM, the mechanic will inspect the timing belt or chain for any signs of damage, such as fraying, wear, or looseness. If there are any issues, they will replace the timing belt or chain.
Perform a Road Test
Finally, the mechanic will take the vehicle for a road test to ensure that the P0335 code has been properly diagnosed and repaired. If everything is working correctly, the code should no longer appear on the scan tool.
By following these steps, a professional mechanic can properly diagnose and repair the P0335 code in your Nissan, getting you back on the road with a properly functioning engine.
Conclusion
The P0335 code can be a frustrating issue to deal with, but it's important to address it promptly and correctly.
With Goodhood mobile auto repair services, you can get the issue diagnosed and repaired quickly without the hassle of towing your vehicle to a shop.
By enlisting the help of an experienced and certified mechanic, you can rest assured that the P0335 code will be diagnosed and repaired correctly, leaving you with a car that runs smoothly and reliably.
Frequently Asked Questions
What is the P0335 code?
The P0335 code indicates a malfunction with the crankshaft position sensor in your Nissan. If left unaddressed, this can lead to more severe engine problems and potentially leave you stranded on the side of the road.
What are some common causes of the P0335 code?
Common causes of the P0335 code include faulty or damaged crankshaft position sensors, wiring issues, failed ECM, timing belt/chain problems, and mechanical issues such as worn or damaged crankshafts.
How does a professional mechanic diagnose and repair the P0335 code?
A professional mechanic typically follows a series of steps to diagnose and repair the P0335 code, including conducting a visual inspection, performing a scan tool diagnosis, testing the crankshaft position sensor, checking the wiring harness, inspecting the ECM, checking the timing belt or chain, and performing a road test.