Your Questions Answered By Our Experts
What are the signs of a leaking rack and pinion?
Leaks in the rack and pinion system are one of the most common problems that drivers face. If you suspect that your vehicle may have a leak, there are a few signs to look out for. One of the first things you may notice is a loss of power steering fluid. This can be evidenced by a drop in the level of fluid in the power steering reservoir or by a leaking fluid line. Another symptom of a rack and pinion leak is difficulty steering, especially at high speeds. Additionally, you may hear a whining noise coming from the power steering pump or feel a vibration in the steering wheel. If you notice any of these symptoms, it is important to have your vehicle checked by a qualified mechanic as soon as possible to prevent further damage.
What Others are Asking
Why does my car jerk when in idle?
Idle speed is the speed at which your engine runs when you are not applying any throttle. Most cars have an idle speed of about 600-1000 RPM. If your car is jerking at idle, it could be caused by a fe...
My Trangle Light and VSA light are on. Why is that?
If your Triangle Light and VSA light are on, there is likely an issue with your vehicle's stability control system. This could be due to an issue with one of the sensors the system uses to monitor th...
Why does my car overheat at idle?
One possible reason your car might overheat at idle is that the cooling fans are not functioning properly. The cooling fans help to circulate air around the radiator and keep the engine cool. If the f...
How to know which blend door actuator is affected?
There are a few ways that you can tell which blend door actuator is affected. One way is to look at the position of the actuator arm. If the arm is in the correct position, the actuator works properly...
What is the meaning of OBD-II code P0137, and what are the possible causes and solutions for this code to be generated?
The P0137 is an OBD-II code indicating that the bank 1 sensor 2 O2 sensor is not increasing its voltage output above .21 volts, signaling excessive oxygen in the exhaust. This occurs when the ECM sees...