Your Questions Answered By Our Experts

After starting the engine, initial warning lights will appear on the dash, but they should disappear shortly.

Warning lights on a car's dash are designed to give the driver information about the vehicle's systems. After starting the engine, initial warning lights may appear on the dash, but they should disappear shortly. These warning lights may indicate a need for the driver to take action, such as adding oil or checking tire pressure. Other times, they may simply be letting the driver know that the vehicle is functioning properly. In either case, it is important to pay attention to the warning lights and take appropriate action when necessary.

What Others are Asking

What's the reason for my AT oil temp light flashing?

At oil temp, light flashing results from an incorrect or faulty sensor reading. It could be a loose connection, a bad sensor, or a problem with the engine control unit (ECU). This light is usually red...

What's the difference between idle control valve and auxiliary idle air control valve?

The idle control valve regulates the amount of air that bypasses the throttle plate to maintain a constant engine idle speed. In contrast, the auxiliary idle air control valve regulates the amount of ...

Are Low-Profile Tires More Likely To Blow Out Or Puncture?

Low-profile tires are more susceptible to road hazards than regular tires. They are also more likely to blow out or puncture. If you drive on the road with many potholes or other obstacles, it is best...

What is the meaning of OBD-II code P0303, and what are the possible causes and solutions for this code to be generated?

The ECU sets the P0303 code when multiple misfires are detected from cylinder 3, causing the Check Engine Light to come on and the vehicle to enter failsafe mode. The light remains on until the issue ...

Why is the AC blowing hot air?

If your car's air conditioning is blowing hot air, there are several possible reasons: Low Refrigerant - Low refrigerant levels can cause the AC system to blow hot air. This could be due to a leak in ...